An electrician is a good career path for those who are interested in working with their hands and like to solve problems. Electricians are responsible for installing, repairing, and maintaining electrical systems in homes, businesses, and factories. They work with a variety of equipment, including motors, circuit breakers, transformers, and wiring.
What Does an Electrician Do?
An electrician is a skilled tradesman who is in charge of the wiring and systems that supply electricity to a facility. They are educated in the design, installation, maintenance, and troubleshooting of electrical wiring systems. Residential wiremen, inside wiremen, telecommunications electricians, and outside linemen are the four basic types of electricians. Some work a regular 40-hour week shift, while others are on-call. In some cases, traveling is also an important part of their job, as they may work for a few days before moving to another location.
Here are some examples of responsibilities from real electrician resumes that represent typical tasks they would be expected to perform in their roles.
- Troubleshoot devices such as transformers, motor starters, motors, PLCs, VFDs, and light fixtures.
- Assemble, install, and test electrical equipment on residential, commercial, and industrial construction projects in accordance with the National Electrical Code and local codes.
- Gather materials, pull the cable, install plugs and switches, run MC, and replace light fixtures.
- Install PLC systems, variable speed drive systems, and program PLC code for new on-site-built equipment.
- Work on commercial tenant improvement projects, including the installation of PVC for underground power feeds, MC cable, flex, and EMT pipe.
- Install HVAC and electrical systems in commercial and residential buildings.
- On new residential and commercial projects, install electrical rough-in and trim.
- Work on the underground civil team, which is responsible for all underground work for the ac to dc plant.
- Walk the completed rough-in and trim with the code inspector and provide electrical warranty service to the homeowners.
- Bending conduit and hanging cable trays for industrial water treatment facilities, as well as PLC control systems, are specialties.
- Work as part of a team to install underground conduit, EMT conduit, main switch gears, and primary wire pulls.
- Install voice and data cables, MC cable, and power conductors to distribution units.
How to Become an Electrician?
Although most electricians learn through an apprenticeship, some start out by attending a technical school. Most states require electricians to be licensed. For more information, contact your local or state electrical licensing board. Some electricians begin their careers by attending a technical school. Many technical schools offer circuitry, safety, and basic electrical information programs. Graduates are usually given credit for their apprenticeships.
How Much Does an Electrician Make?
In America, the average annual salary is $53,771 or $26 per hour. The top 10% earn more than $75,000 per year, while the bottom 10% earn less than $38,000 per year.
What Are the Advantages of Becoming an Electrician?
There are a number of reasons why becoming an electrician could be a good career choice.
Job Growth: The Bureau of Labor Statistics predicts a 14% increase in job opportunities for electricians through 2024. This is more than double the national average of 7%.
Career Advancement: As an electrician’s experience and training grow, he or she can advance from Journeyman to Master. Master electricians typically have the ability to perform higher-level tasks, which can translate into higher pay rates. They can, for example, order permits, whereas Journeymen cannot.
Self-Employment: Working for oneself as an electrician is an option. In 2014, one out of every ten electricians worked for themselves. These professionals frequently have the ability to set their own schedules.
Union Membership: Many electricians belong to a union. 4 Union members frequently have access to more benefits than nonunion members, such as healthcare. They may also have more job security.
Variety: Unlike office workers, who typically sit at the same desk every day, electricians have active jobs that require them to travel to different worksites to take on new projects rather than working in a routine environment.
What Qualities Should an Electrician Have?
Business acumen- Electricians who work for themselves must be able to bid on new jobs, track inventory, and plan payroll and work assignments.
Color perception- Electrical wires must be identified by color by electricians.
Critical-thinking abilities- Electricians conduct tests and use the results to troubleshoot problems. When an outlet stops working, for example, they may use a multimeter to check the voltage, amperage, or resistance to determine the best course of action.
Customer service abilities- Residential electricians, interact with people on a daily basis. They should be approachable and capable of answering customers’ questions.
Physical endurance- Electricians are frequently required to move throughout the day while running wire and connecting fixtures to the wire.
Physical stamina- Electricians must be physically fit to move heavy components weighing up to 50 pounds.
Troubleshooting abilities- Electricians troubleshoot, diagnose, and repair problems. For example, if a motor fails, they conduct tests to determine the cause of the failure and then repair or replace the motor based on the results.
What Are the Best Online Courses for Becoming an Electrician?
Here are the most excellent online courses that will help you build a career as an electrician.
Fundamentals of Electrical Controls by Udemy-
In this course, You will concentrate on industrial and commercial installations, beginning with the fundamentals of electrical circuits. You examine the fundamentals of resistive circuits and introduce Ohms Law, a mathematical formula that all electricians must understand. At the end of the course, They’ll put themselves to the test and learn how to find a circuit as an electrical controls technician would if we were called to a breakdown. You’ll go over a few faults that we might encounter in the industry and how we might repair them.
The Basics of Household Wiring – The Electrical System A to Z by Udemy-
Through this course, you’ll go over all of the different types of receptacles, switches, and light fixtures, as well as how to wire them correctly. Safe practices, including the use of circuit testers, are thoroughly covered. The course covers rough-in wiring in detail and explains the role, use, and significance of ground fault and arc fault circuit protection. By the end of the course, the student will safely and competently complete most small electrical projects and repairs around the home.
Data Center Essentials: Power & Electrical by Udemy-
This course will go over terminology, standards, acronyms, operation, efficiency, and other aspects of the most common electrical systems and equipment used in data centers. Whether taking a walk through a data center or working in one every day, it’s critical to understand how the power around you flows to keep the internet running.
Renewable Power and Electricity Systems by Coursera-
This course provides a solid foundation in the fundamentals of renewable energy. You’ll begin by discussing how electricity is measured, how electricity systems work, and how renewable technologies such as wind turbines and solar PV work. You’ll then go over technical and market fundamentals, such as how and why renewables are driving change in global electricity systems, how electricity systems are changing to accommodate all of these new renewables, and what all of this means for those looking to understand and participate in the global transformation of electricity systems. This global transformation is just getting started, and with the knowledge, you’ll gain from this course, you’ll be ready to jump on board.
Introduction to Electronics by Coursera-
This course teaches students the fundamental components of electronics, such as diodes, transistors, and operational amplifiers (op-amps). It covers the fundamentals of functioning as well as a few typical applications.
Introduction to Basic Electrical Drawings and Test Equipment – Revised by Alison-
It is the most popular of our free electrical courses, and it is because it concentrates on the fundamentals of electrical technology. This online course will teach you how to correctly interpret electrical drawings and the functions of critical electrical equipment. You will understand the concepts of power, lighting, and communication at the end of the course and be much more familiar with critical electrical symbols and test equipment.
Introduction to Electrical Wiring Systems by Alison-
The essential electrical wiring systems, including raceways and device boxes, are covered in this specialist course. Each component of an electrical wiring system will be covered, and suitable handling techniques, installation, and storage processes for various electrical wire components.
Electrical Transformer Components by Alison-
In this course, Electrical transformer construction and components topics will be covered. Electrical transformers are essential for any electrical distribution system because they ensure appropriate energy transmission via the grid.
What Are the Best Colleges to Pursue an Electrician Degree?
Here are some of the best colleges for pursuing an electrician degree.
Washburn Institute of Technology
Washburn Tech provides an online electrician degree to help aspiring electricians get started in this lucrative, hands-on field. Electrical technology is a vocational curriculum at Washburn Tech that prepares students for electrical maintenance and construction careers. The half-day program, which is open to both high school students and adults, requires two semesters to complete. Print reading, commercial wiring, residential wiring, national electrical code II, and international residential code are covered.
Pamlico Community College
The institution offers programs that prepare students for employment, including an electrician degree. PCC’s electrical systems technology program includes basic wiring methods, conduit bending, and industrial motor controls. Codes and standards, digital electronics, construction math, and programmable logic controllers are essential topics.
Salina Area Technical College
The institution offers associate degrees and certificates in professional preparation, and students can achieve an electrician degree in two years. Electrical technology is a vocational program at SATC that teaches students to compute accurately, utilize proper electrical terminology, and comprehend blueprints, diagrams, and schematics. Technical math, commercial wiring, blueprint interpretation, and technical writing are offered.
Central Louisiana Technical Community College
A 45-credit electrician degree is one of the college’s majors. Future electricians can earn a technical diploma and competency certificates in seven categories, including industrial electrician, solar systems, and commercial wiring, through CLTCC’s electrician technology career program. Electrical raceways, blueprint interpretation, technical mathematics for electricians, and an introduction to programmable logic controllers are among the topics covered in these classes.
Altierus Career College
The electrician program at the college combines online and on-campus learning. The electrical construction technician trade program at the institution teaches students how to install, maintain, and repair electrical systems. Electrical theory, electric motors, electrical craft skills, transformers, and power distribution are covered.
Michigan State University
Electrical engineering is offered as a bachelor’s degree program at the university. Robotics and control, biomedical engineering, micro/nanoelectronics, materials and devices, electromagnetics, energy and power systems, and computer architecture and embedded systems are among the areas of electrical and computer engineering research at MSU.
Florida Technical College
Florida Technical College’s Electrical Diploma Program equips students with the technical abilities and practical knowledge needed to conduct electrical installation, service, and repair jobs. Graduates of this electrical training program will be qualified to work as electrician assistants for service and construction companies in the residential, commercial, and industrial sectors of the electrical trade.
American River College
American River College offers an Electrician Trainee Program to students who aspired to be electricians in the future. The installation, operation, and repair of residential and commercial electrical distribution systems are covered in this program. Safety training, AC/DC electrical theory, metering, electronics, usage of electrical codes, raceways, conductors, grounding, motors, transformers, fire alarm systems, fiber optics, and HVAC systems are some of the topics covered. Students may find work in the following industries after completing the program: government, residential and commercial construction and maintenance, utilities, and facilities management.
Working as an electrician is a great career choice. It allows you to work in the field, which means that your days are never boring. You may be able to make more money than other careers, and there are many different types of jobs available for those who want this type of lifestyle. If you’re looking for a great career, being an electrician may be the perfect option for you.